- 最后登录
- 2017-5-4
- 在线时间
- 81 小时
- 威望
- 999
- 金钱
- 2391
- 注册时间
- 2013-9-11
- 阅读权限
- 150
- 帖子
- 1124
- 精华
- 5
- 积分
- 999
- UID
- 1220
|
1#
发表于 2017-4-16 09:23:52
|
查看: 1986 |
回复: 0
本人初学aix,单位新购了P650,因此有了台s70机器可以练手,我便在原来s70机器上将aix4.3升级到aix5.2,可是升级后,新建的datavg却无法varyon,不知何因,特此求助!请多多指教
过程如下:
# lslv -m hd5
hd5:N/A
LP PP1 PV1 PP2 PV2 PP3 PV3
0001 0001 hdisk0
# lspv
hdisk0 000956984f11b725 rootvg active
hdisk1 00095698d6873c9a testvg
# lsdev -Cc disk
hdisk0 Available 30-68-00-0,0 16 Bit SCSI Disk Drive
hdisk1 Available 30-70-L SSA Logical Disk Drive
# lsvg
rootvg
testvg
# varyonvg -s testvg
PV Status: hdisk1 00095698d6873c9a PVNOTFND
0516-013 varyonvg: The volume group cannot be varied on because
there are no good copies of the descriptor area.
试过cfgmgr没有效果!
exportvg testvg
rmdev -dl hdisk1
cfgmgr
importvg -y testvg hdisk1
出现错误提示:
# importvg -y testvg hdisk1
0516-024 lqueryvg: Unable to open physical volume.
Either PV was not configured or could not be opened. Run
diagnostics.
0516-024 lqueryvg: Unable to open physical volume.
Either PV was not configured or could not be opened. Run
diagnostics.
0516-1140 importvg: Unable to read the volume group descriptor area
on specified physical volume.
重新建立vg也出错,提示如下
# mkvg -q -y testvg hdisk1
0516-1182 mkvg Open Failure on hdisk1.
0516-862 mkvg: Unable to create volume group.
|
|