10.2.0.5 升级 执行root102.sh crcheck failed

taoy_2008

oracle linux 5.7 os  安装好10。2.0.1cluster后。升级到10.2.0.5后。 执行root102.sh  报错。
root102.sh [root@rac1 install]# ./root102.sh
Creating pre-patch directory for saving pre-patch clusterware files
Completed patching clusterware files to /s01/app/oracle/product/10.2.0/crs
Relinking some shared libraries.
Relinking of patched files is complete.
/bin/chmod: cannot access `/s01/app/oracle/product/10.2.0/crs/lib/libclntsh.so.10.1': No such file or directory
WARNING: directory '/s01/app/oracle/product/10.2.0' is not owned by root
WARNING: directory '/s01/app/oracle/product' is not owned by root
WARNING: directory '/s01/app/oracle' is not owned by root
WARNING: directory '/s01/app' is not owned by root
WARNING: directory '/s01' is not owned by root
Preparing to recopy patched init and RC scripts.
Recopying init and RC scripts.
ocrcheck failed. Check /s01/app/oracle/product/10.2.0/crs/srvm/log for more details

/s01/app/oracle/product/10.2.0/crs/srvm/log 为空目录。

Maclean Liu(刘相兵

这些参数应当在 装10.2.0.1 前设置好

taoy_2008

Maclean Liu(刘相兵 发表于 2013-3-25 14:05
FYI

root102.sh after applying 10.2.0.4 patchset encounter 'ocrcheck failed' error

我是直接安装好10.2.0.1 后 升级到10.2.0.5的。 也要按照这个检查么？

Maclean Liu(刘相兵

FYI

root102.sh after applying 10.2.0.4 patchset encounter 'ocrcheck failed' error [ID 743723.1]

Symptoms
After upgrading CRS from 10.2.0.1 to 10.2.0.4 via OUI, running root102.sh, give error:
Preparing to recopy patched init and RC scripts.
Recopying init and RC scripts.
./root102.sh[801]: 18983 Killed
ocrcheck failed. Check /vol2/crs/oracle/product/10.2/srvm/log for more details

Cause
The problem is caused by ulimit stack size is under sized.

During execution of root102.sh, building 64 bit libttsh10.so library, encounter 'out of memory' error from the OS.
Building 64bit libttsh.so
ld +s -G -b -o /vol2/crs/oracle/product/10.2/lib/libttsh10.so -c
....
-lunwind -lnsl -lc -lpthread

Out of Memory.
/vol2/crs/oracle/product/10.2/bin/genagtsh /vol2/crs/oracle/product/10.2/lib/libagtsh.so 1.0

ulimit for root and oracle is undersized:

Using: /usr/bin/ksh -f -c "ulimit -a"
time(seconds) unlimited
file(blocks) unlimited
data(kbytes) 206383
stack(kbytes) 8192
memory(kbytes) unlimited
coredump(blocks) 4194303

"Out of memory" indicates undersized memory.

Solution
1. Increase ulimit for both root and oracle to these values.
/home/oracle$ ulimit -a
time(seconds) unlimited
file(blocks) unlimited
data(kbytes) 4194300
stack(kbytes) 392192
memory(kbytes) unlimited
coredump(blocks) 4194303
nofiles(descriptors) 4096

2. Make sure both 'libclntsh.so.10.1' and 'libttsh10.so' has 755 permission and owned by Oracle before you run the installer.