hwqhx

91 积分	0 好友	3 主题

发消息

Why the VIP subnet mask is not the same as that of the public NIC

1^#

发表于 2011-12-31 07:43:04 | 查看: 6280| 回复: 5

PUBLIC NIC.
oracle@:/oracle$ /usr/sbin/ifconfig lan900
lan900: flags=1843<UP,BROADCAST,RUNNING,MULTICAST,CKO>
      inet 10.32.115.31 netmask ffffff80 broadcast 10.32.115.127

 PUBLIC NIC’S VIP info .

oracle@1:/oracle$ /usr/sbin/ifconfig lan900:801
lan900:801: flags=8000000000001843<UP,BROADCAST,RUNNING,MULTICAST,CKO,PORT>
      inet 10.32.115.33 netmask ffffff00 broadcast 10.32.115.255

Information from oifcfg.

oracle@:/oracle$ oifcfg getif
lan901  172.32.115.0  global  cluster_interconnect
lan900  10.32.115.0  global  public

分享0

收藏0 回复只看该作者道具举报

hwqhx

2^#

发表于 2011-12-31 07:46:56

发错了，重新开

[ 本帖最后由 hwqhx 于 2011-12-31 07:48 编辑 ]

回复只看该作者道具举报

武汉-SSH

3^#

发表于 2011-12-31 12:13:04

这个应该是配置的时候没有严格去写掩码导致。

回复只看该作者道具举报

Maclean Liu(刘相兵

4^#

发表于 2011-12-31 12:35:18

Know more about ORACLE RAC VIP!!!!

Oracle RAC 10g VIPThe Details!

One for each node in cluster
Required for Oracle Clusterware installation
IP and network name should not currently be in use
Should be registered in DNS and be on the same subnet as public IP address
Can use OS bonding to provide failover and load balancing on network interfaces on the node
Configuration managed by VIPCA

Note that netmask defaults to 255.255.255.0, rather than defaulting to netmask of underlying physical interface.

If not in DNS, then it should be at least in the /etc/hosts file for all nodes in cluster and any client node accessing the cluster.
Note the installer will not accept a VIP in the following
10.0.0.0 - 10.255.255.255 (10/8 prefix)
172.16.0.0 - 172.31.255.255 (172.16/12 prefix)
192.168.0.0 - 192.168.255.255 (192.168/16 prefix)
However VIPCA will let you configure them post install (just let VIPCA part of the install fail)

回复只看该作者道具举报

武汉-SSH

5^#

发表于 2011-12-31 12:57:27

这个还真没注意，部署过几个NETMASK 不是 24的，但是起来后的VIP，还真没注意NETMASK是否不同。

回复只看该作者道具举报

武汉-SSH

6^#

发表于 2012-2-28 19:39:21

今天正好测试了一个 Mask:255.255.255.192 的，
11.2.0.3
# ifconfig|grep addr
eth2    Link encap:Ethernet  HWaddr 10:1F:74:32:D9:70
      inet addr:10.36.6.20  Bcast:10.36.6.63  Mask:255.255.255.192
eth2:1 Link encap:Ethernet  HWaddr 10:1F:74:32:D9:70
      inet addr:10.36.6.22  Bcast:10.36.6.63  Mask:255.255.255.192
eth2:2 Link encap:Ethernet  HWaddr 10:1F:74:32:D9:70
      inet addr:10.36.6.23  Bcast:10.36.6.63  Mask:255.255.255.192
eth3    Link encap:Ethernet  HWaddr 10:1F:74:32:D9:74
      inet addr:192.168.100.200  Bcast:192.168.100.255  Mask:255.255.255.0
eth3:1 Link encap:Ethernet  HWaddr 10:1F:74:32:D9:74
      inet addr:169.254.4.141  Bcast:169.254.255.255  Mask:255.255.0.0
      inet addr:127.0.0.1  Mask:255.0.0.0

回复只看该作者道具举报

返回列表

		自动登录	找回密码
密码			注册