Oracle数据库数据恢复、性能优化»论坛 › Oracle › Oracle数据库管理 › logical standby apply redo log时报警

tohjb

35 积分	0 好友	1 主题

发消息

logical standby apply redo log时报警

1^#

发表于 2012-5-13 21:15:27 | 查看: 7727| 回复: 2

Ver: oracle 11.2.0.1
os: CentOS 6.0

logical standby apply redo log时，出现大片报警：

LSP0: warning -- apply server 9, sid 103 waiting for event (since 621 seconds):
LSP0: warning -- apply server 4, sid 394 waiting for event (since 621 seconds):

log里打出来很多上面的警告，请教，这个是什么含义？

如何解决？

非常感谢！

[ 本帖最后由 tohjb 于 2012-5-13 21:24 编辑 ]

分享0

收藏0 回复只看该作者道具举报

Maclean Liu(刘相兵

2^#

发表于 2012-5-13 21:36:17

请上传压缩后完整的 alert.log

并在logical standby上运行以下脚本，并上传结果

- - - - - - - - - - - - - - - - Script begins here - - - - - - - - - - - - - - - -
-- NAME: dg_lsby_diag.sql (Run on LOGICAL STANDBY)
-- ------------------------------------------------------------------------
-- Copyright 2002, Oracle Corporation
-- LAST UPDATED: 2/23/04
--
-- Usage: @dg_lsby_diag
-- ------------------------------------------------------------------------
-- PURPOSE:
-- This script is to be used to assist in collection information to help
-- troubeshoot Data Guard issues involving a Logical Standby.
-- ------------------------------------------------------------------------
-- DISCLAIMER:
-- This script is provided for educational purposes only. It is NOT
-- supported by Oracle World Wide Technical Support.
-- The script has been tested and appears to work as intended.
-- You should always run new scripts on a test instance initially.
-- ------------------------------------------------------------------------
-- Script output is as follows:
set echo off
set feedback off
column timecol new_value timestamp
column spool_extension new_value suffix
select to_char(sysdate,'Mondd_hhmi') timecol,
'.out' spool_extension from sys.dual;
column output new_value dbname
select value || '_' output
from v$parameter where name = 'db_name';
spool dg_lsby_diag_&&dbname&&timestamp&&suffix
set linesize 79
set pagesize 180
set long 1000
set trim on
set trims on
alter session set nls_date_format = 'MM/DD HH24:MI:SS';
set feedback on
select to_char(sysdate) time from dual;
set echo on
-- The following select will give us the generic information about how
-- this standby is setup. The database_role should be logical standby as
-- that is what this script is intended to be ran on.
column ROLE format a7 tru
column NAME format a8 wrap
select name,database_role,log_mode,protection_mode
from v$database;
-- ARCHIVER can be (STOPPED | STARTED | FAILED). FAILED means that the
-- archiver failed to archive a log last time, but will try again within 5
-- minutes. LOG_SWITCH_WAIT The ARCHIVE LOG/CLEAR LOG/CHECKPOINT event log
-- switching is waiting for. Note that if ALTER SYSTEM SWITCH LOGFILE is
-- hung, but there is room in the current online redo log, then value is
-- NULL
column host_name format a20 tru
column version format a9 tru
select instance_name,host_name,version,archiver,log_switch_wait
from v$instance;
-- The following query give us information about catpatch.
-- This way we can tell if the procedure doesn't match the image.
select version, modified, status from dba_registry
where comp_id = 'CATPROC';
-- Force logging and supplemental logging are not mandatory but are
-- recommended if you plan to switchover. During normal operations it is
-- acceptable for SWITCHOVER_STATUS to be SESSIONS ACTIVE or NOT ALLOWED.
column force_logging format a13 tru
column remote_archive format a14 tru
column dataguard_broker format a16 tru
select force_logging,remote_archive,supplemental_log_data_pk,
supplemental_log_data_ui,switchover_status,dataguard_broker
from v$database;
-- This query produces a list of all archive destinations. It shows if
-- they are enabled, what process is servicing that destination, if the
-- destination is local or remote, and if remote what the current mount ID
-- is.
column destination format a35 wrap
column process format a7
column archiver format a8
column ID format 99
column mid format 99
select dest_id "ID",destination,status,target,
schedule,process,mountid mid
from v$archive_dest order by dest_id;
-- This select will give further detail on the destinations as to what
-- options have been set. Register indicates whether or not the archived
-- redo log is registered in the remote destination control file.
set numwidth 8
column ID format 99
select dest_id "ID",archiver,transmit_mode,affirm,async_blocks async,
net_timeout net_time,delay_mins delay,reopen_secs reopen,
register,binding
from v$archive_dest order by dest_id;
-- Determine if any error conditions have been reached by querying the
-- v$dataguard_status view (view only available in 9.2.0 and above):
column message format a80
select message, timestamp
from v$dataguard_status
where severity in ('Error','Fatal')
order by timestamp;
-- Query v$managed_standby to see the status of processes involved in
-- the shipping redo on this system. Does not include processes needed to
-- apply redo.
select process,status,client_process,sequence#
from v$managed_standby;
-- Verify that log apply services on the standby are currently
-- running. If the query against V$LOGSTDBY returns no rows then logical
-- apply is not running.
column status format a50 wrap
column type format a11
set numwidth 15
SELECT TYPE, STATUS, HIGH_SCN
FROM V$LOGSTDBY;
-- The DBA_LOGSTDBY_PROGRESS view describes the progress of SQL apply
-- operations on the logical standby databases. The APPLIED_SCN indicates
-- that committed transactions at or below that SCN have been applied. The
-- NEWEST_SCN is the maximum SCN to which data could be applied if no more
-- logs were received. This is usually the MAX(NEXT_CHANGE#)-1 from
-- DBA_LOGSTDBY_LOG. When the value of NEWEST_SCN and APPLIED_SCN are the
-- equal then all available changes have been applied. If your
-- APPLIED_SCN is below NEWEST_SCN and is increasing then SQL apply is
-- currently processing changes.
set numwidth 15
select
(case
when newest_scn = applied_scn then 'Done'
when newest_scn <= applied_scn + 9 then 'Done?'
when newest_scn > (select max(next_change#) from dba_logstdby_log)
then 'Near done'
when (select count(*) from dba_logstdby_log
where (next_change#, thread#) not in
(select first_change#, thread# from dba_logstdby_log)) > 1
then 'Gap'
when newest_scn > applied_scn then 'Not Done'
else '---' end) "Fin?",
newest_scn, applied_scn, read_scn from dba_logstdby_progress;
select newest_time, applied_time, read_time from dba_logstdby_progress;
-- Determine if apply is lagging behind and by how much. Missing
-- sequence#'s in a range indicate that a gap exists.
set numwidth 15
column trd format 99
select thread# trd, sequence#,
first_change#, next_change#,
dict_begin beg, dict_end end,
to_char(timestamp, 'hh:mi:ss') timestamp,
(case when l.next_change# < p.read_scn then 'YES'
when l.first_change# < p.applied_scn then 'CURRENT'
else 'NO' end) applied
from dba_logstdby_log l, dba_logstdby_progress p
order by thread#, first_change#;
-- Get a history on logical standby apply activity.
set numwidth 15
select to_char(event_time, 'MM/DD HH24:MI:SS') time,
commit_scn, current_scn, event, status
from dba_logstdby_events
order by event_time, commit_scn, current_scn;
-- Dump logical standby stats
column name format a40
column value format a20
select * from v$logstdby_stats;
-- Dump logical standby parameters
column name format a33 wrap
column value format a33 wrap
column type format 99
select name, value, type from system.logstdby$parameters
order by type, name;
-- Gather log miner session and dictionary information.
set numwidth 15
select * from system.logmnr_session$;
select * from system.logmnr_dictionary$;
select * from system.logmnr_dictstate$;
select * from v$logmnr_session;
-- Query the log miner dictionary for key tables necessary to process
-- changes for logical standby Label security will move AUD$ from SYS to
-- SYSTEM. A synonym will remain in SYS but Logical Standby does not
-- support this.
set numwidth 5
column name format a9 wrap
column owner format a6 wrap
select o.logmnr_uid, o.obj#, o.objv#, u.name owner, o.name
from system.logmnr_obj$ o, system.logmnr_user$ u
where
o.logmnr_uid = u.logmnr_uid and
o.owner# = u.user# and
o.name in ('JOB,'JOBSEQ','SEQ,'AUD,
'FGA_LOG,'IND,'COL,'LOGSTDBY$PARAMETER')
order by u.name;
-- Non-default init parameters.
column name format a30 tru
column value format a48 wra
select name, value
from v$parameter
where isdefault = 'FALSE';
spool off
- - - - - - - - - - - - - - - - Script ends here - - - - - - - - - - - - - - - -

复制代码

回复只看该作者道具举报

tohjb

3^#

发表于 2012-6-11 20:32:28

可能是跟业务有关系。
现在调整了业务的逻辑。目前 log里没有发现这种信息了。

具体原因，还不太清楚。当时的log已经不在了。

回复只看该作者道具举报

返回列表

		自动登录	找回密码
密码			注册